Related Industry (59)

Q: (18520) I'm wondering what you recommend for the cleaning of AC connectors; Pin and Sleeve, Single Pole Staging Cam-Lock, and Twist Lock. Some examples:  Primarily Hubbells HBL2613, HBL 2623, HBL460P7WR, HBL330C6W, HBL400 series. Lori

Q: (19332) Which product is best for cadmium or nickel-zinc plated surfaces? Do they remove oxides and to treat and protect without damaging the plating? Cheers, David

Q: (19337) Hello CAIG, We are professional installers and would like some advice or instruction sheet on which product to use on our audio and video equipment. We also do outdoor installations for home and businesses. Thanks, George

Q: (19362) I run into a lot of corrosion formed by leaky zinc/carbon and alkaline batteries. The battery electrolyte is caustic and forms a hard coating on the nickel plated battery contacts. DeoxIT D-Series doesn't seem to have any effect on this ty...

Q: (19441) Industry: Marine/Defense Systems Message: I am having issues with display port and HDMI connections at high humidity levels, where moisture gets into the connectors and corrodes them. We are looking into the possibility of using some sort ...

Q: (19480) Normally our outdoor LED displays are fixed installations but we have several that are mounted on the back of trucks. Over time the power connections start to lose contact creating more resistance and causing issues. These are gold plated ...

Q: (19495) Would you recommend any cleaners or methods (soft paintbrush etc) to clean the pin holes inside where my CPU on my motherboard mounts left it open for 6 months forgot to tape it just dust and maybe some smoke film it's a Asus rog crosshaiv...

Q: (19568) Your selection Guide indicates that DeoxIT L27-ME is good for high current and high voltage applications but not recommended for low current and low voltage electrical contacts. My application is ring connectors on terminal blocks and on c...

Q: (19595) I am trying to figure out which product, if any, will be best to lubricate some old P&G faders (motorized). I would rather not have to take the console out of service to remove the faders if possible. Thanks for your time. Thank you, Scott

Q: (19652) When applying your DeoxIT® Shield and DeoxIT® Gold, does the applied contact area need to stay wet or can it be wiped off an still be effective? If either is applied to an RF connector and the connector is connected to a mating connector, ...