Answers
Question
1
updated 4 years ago
Category or Product:
A. Audio/Video
Q: (18989) I have been using DeoxIT D5 cleaner on my Marantz 2325 beast for years now. It typically needs to have every silver-plated rotary switch sprayed every 6 months or so. As this is a lot of opening and flipping upside-down and sideways, so op...
1
updated 4 years ago
Category or Product:
F. Electrical
Tags:
Q: (19332) Which product is best for cadmium or nickel-zinc plated surfaces? Do they remove oxides and to treat and protect without damaging the plating? Cheers, David
1
updated 4 years ago
Category or Product:
A. Audio/Video
Q: (19337) Hello CAIG, We are professional installers and would like some advice or instruction sheet on which product to use on our audio and video equipment. We also do outdoor installations for home and businesses. Thanks, George
1
updated 4 years ago
Category or Product:
D. Communications
Tags:
Q: (19362) I run into a lot of corrosion formed by leaky zinc/carbon and alkaline batteries. The battery electrolyte is caustic and forms a hard coating on the nickel plated battery contacts. DeoxIT D-Series doesn't seem to have any effect on this ty...
1
updated 4 years ago
Category or Product:
K. Military
Tags:
Q: (19441) Industry: Marine/Defense Systems Message: I am having issues with display port and HDMI connections at high humidity levels, where moisture gets into the connectors and corrodes them. We are looking into the possibility of using some sort ...
1
updated 3 years ago
Category or Product:
B. Automotive
Q: (19480) Normally our outdoor LED displays are fixed installations but we have several that are mounted on the back of trucks. Over time the power connections start to lose contact creating more resistance and causing issues. These are gold plated ...
1
19568
Best product for ring connectors on terminal blocks and on circuit breakers in a marine environment?
updated 3 years ago
Category or Product:
J. Marine
Q: (19568) Your selection Guide indicates that DeoxIT L27-ME is good for high current and high voltage applications but not recommended for low current and low voltage electrical contacts. My application is ring connectors on terminal blocks and on c...
3
updated 3 years ago
Category or Product:
D. Communications
Q: (19652) When applying your DeoxIT® Shield and DeoxIT® Gold, does the applied contact area need to stay wet or can it be wiped off an still be effective? If either is applied to an RF connector and the connector is connected to a mating connector, ...
1
updated 3 years ago
Category or Product:
G. Electronics
Q: (19698) Industry: Other Contract Electronics Manufacturing Message: We have a customer that is having connectivity issues on some of their products. When they use your DeoxIT G100L they state that they can get upwards of 60% improved results. The ...
1
updated 3 years ago
Category or Product:
A. General Question
Q: (19851) Hi I have pretty much exclusively used DeoxIT D5 on pots and anything I want to improve the conductivity of. Should I be using Fader spray on the rotary pots instead? I did read where someone claimed that DeoxIT leaves a film which attract...