Description
DeoxIT® D-Series – Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant
Part No. D100S-2:
100% Spray, No solvents
Applicator: Spray, provides NO flushing action, applies 100% DeoxIT® using a metered one-shot valve.
Formulation: 20% DeoxIT® (active ingredient), 80% propellant
Use: When solvents are not required or materials are sensitive to any solvents. No flushing action. Spray provides application of DeoxIT® on connectors and components that are not easily accessible.
Notes: Use when over spray is an issue and on sensitive materials. Formulation safe on plastics. On easily accessible surfaces, recommend wiping off excess, leaving a thin layer.
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.
- KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Lubricates and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
