DeoxIT® D-Series – Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant
Part No. D100W-3X3: (100 count)
100% Liquid, No solvents
Applicator: Cotton Wipes, 3.0 x 3.0″, provides NO flushing action, applies 100% DeoxIT®.
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. Provides wiping action – wipe with the grain recommended. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.
- KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Improves and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer