Answers
Question
1
updated 4 years ago
Category or Product:
E. Computers
Tags:
Q: (19495) Would you recommend any cleaners or methods (soft paintbrush etc) to clean the pin holes inside where my CPU on my motherboard mounts left it open for 6 months forgot to tape it just dust and maybe some smoke film it's a Asus rog crosshaiv...
1
19568
Best product for ring connectors on terminal blocks and on circuit breakers in a marine environment?
updated 4 years ago
Category or Product:
J. Marine
Q: (19568) Your selection Guide indicates that DeoxIT L27-ME is good for high current and high voltage applications but not recommended for low current and low voltage electrical contacts. My application is ring connectors on terminal blocks and on c...
1
updated 4 years ago
Category or Product:
B. Automotive
Q: (19480) Normally our outdoor LED displays are fixed installations but we have several that are mounted on the back of trucks. Over time the power connections start to lose contact creating more resistance and causing issues. These are gold plated ...
1
updated 4 years ago
Category or Product:
K. Military
Tags:
Q: (19441) Industry: Marine/Defense Systems Message: I am having issues with display port and HDMI connections at high humidity levels, where moisture gets into the connectors and corrodes them. We are looking into the possibility of using some sort ...
1
updated 4 years ago
Category or Product:
D. Communications
Tags:
Q: (19362) I run into a lot of corrosion formed by leaky zinc/carbon and alkaline batteries. The battery electrolyte is caustic and forms a hard coating on the nickel plated battery contacts. DeoxIT D-Series doesn't seem to have any effect on this ty...
1
updated 4 years ago
Category or Product:
A. Audio/Video
Q: (19337) Hello CAIG, We are professional installers and would like some advice or instruction sheet on which product to use on our audio and video equipment. We also do outdoor installations for home and businesses. Thanks, George
1
updated 4 years ago
Category or Product:
F. Electrical
Tags:
Q: (19332) Which product is best for cadmium or nickel-zinc plated surfaces? Do they remove oxides and to treat and protect without damaging the plating? Cheers, David
1
updated 4 years ago
Category or Product:
A. Audio/Video
Q: (18989) I have been using DeoxIT D5 cleaner on my Marantz 2325 beast for years now. It typically needs to have every silver-plated rotary switch sprayed every 6 months or so. As this is a lot of opening and flipping upside-down and sideways, so op...
2
updated 4 years ago
Category or Product:
G. Electronics
Q: (18854) First, I love your products. My electronics have benefited from them for years. However, I saw this on your website "WARNING: Alcohol / ethanol are conductive" Alcohol (isopropyl alcohol, ethanol and isopropanol) is a polar solvent (very c...
2
updated 4 years ago
Category or Product:
A. Audio/Video
Tags:
Q: (18848) Dear CAIG, Please advise the correct product(s) for cleaning volume potentiometers associated with small vintage and currently produced portable radios. Most of these potentiometers operate erratically, resulting in poor volume and control...