Description
DeoxIT® D-Series Mini-Spray- Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant
Part No. D5S-2-2X (Twin-Pack):
Low-Med-High Adjustable Valve
(One mini-spray in a blister-pack, the second without)
Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT® (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.
- KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Lubricates and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
