UNIQUE CONTACT/CONNECTOR TREATMENT, REJUVENATOR AND PROTECTOR
“Bring Old Systems Back to Life!”
(Strongest deoxidizer in the DeoxIT® line)
DeoxIT® D-Series contact/connector treatment, dissolves oxides and sulfides that form on metal surfaces. This restores the contact’s integrity and leaves a thin microscopic layer that protects the metal. Special additives improve conductivity and prevent dissolved oxides from re-attaching, keeping them in suspension and allowing them to be easily dispersed by the mechanical action of the contact.
Key Features
+ Removes oxidation & corrosion
+ Lubricates & seals connections
+ Improves conductivity without causing shorts
+ Virtually eliminate intermittent signals
+ Improves signal quality
+ Increase data speeds
+ Ideal for stationary and parts subject to vibration
+ Reduces wear and abrasion
+ Actively displaces moisture & contaminates
For reference, DeoxIT® D-Series
has approximately 20% deoxidizing action.
Where To Apply
+ ALL Metal Connections
+ Batteries, Light Bulbs
+ Switches and Relays
+ Jacks and Plugs
+ Harnesses, Grounding Blocks
+ RCA jacks, XLRs, USB, HDMI, Ethernet, etc.
Which to use?
DeoxIT® D-Series is a general purpose treatment, for all metal surfaces with oxidation and corrosion. If there is a discoloration of the metal (visual signs of oxidation/corrosion) – it is considered oxidized. Use DeoxIT® D-Series to dissolve contamination, improve the connection as well as lubricate and protect the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.
NOTE: For plated surfaces (gold and other precious metals) or severe environments refer to the DeoxIT® Gold G-Series and DeoxIT® Shield S-Series, respectively.
WHY Do I Need DeoxIT®?
Ever wonder why electronic or electrical devices have glitches, intermittents or data errors, or wonder how you can prevent this from happening?
Well, most of the time it is caused by ONE of the thousands of metal connections in the system or device. All electronic connections deteriorate which cause reduced performance or perhaps total failure.
SOLUTION: DeoxIT® D-Series contact/connector treatment. It’s a fast-acting deoxidizing solution that treats, protects, lubricates and improves conductivity on all metal connectors and contacts.
WHY is DeoxIT® Different?
Simple contact “cleaners” wash away dirt, dust, and grime, but prove ineffective at removing oxidation and surface sulfides. These tough contaminants actually attach to and become an integral part of the contact metal. This issue causes increased unnecessary service calls for covered warranty repairs that could have been prevented, translating into literally millions of dollars of lost revenue for service organizations.
The only true method of eliminating oxidation and surface sulfides is by chemical action and reaction. This is one aspect separating DeoxIT® products from other products, putting it in a class by itself.
MYTH BUSTED – DeoxIT® D5
DOES NOT destroy carbon potentiometers!
