show blocks helper

1) Conductive Material Type?

2) Oxidation Level?

3) Is Surface Easy To Access?

4) Sensitive materials or components near surface?

5) Flammability an issue?

DeoxIT® Greases, L260 and M260
Manufactured in semi-solid form for use as a combination cleaning, deoxidizing, protecting and lubricating preparation.
Greases protect against oxidation (galvanic corrosion) and are free of mineral acids, sulphurs, alkalis and other noxious components aggressive to metals.
DeoxIT® Greases improve performance of electrical connections and mechanical components that require precise lubrication.

DeoxIT® Grease Type M260 – Mineral-based preparation. Excellent lubrication, good wear resistance, excellent oxidation (galvanic corrosion) protection and good dripping-point characteristics. Operating temperatures: -40oC to 260oC
DeoxIT® Grease Type L260 – Lithium-based preparation. Good lubrication, excellent wear resistance, excellent pressure resistance, excellent oxidation (galvanic corrosion) protection, high dripping-point characteristics. Operating temperatures: -40oC to 260oC.
NO particles (L260Np and M260Np) = Soft, thixotropic grease for lubrication and protection of surfaces. Maximum lubrication for relatively clean surfaces.COPPER particles (L260Cp and M260Cp) = Use when you require particles (conductive) to assist in oxide and corrosion breakup and need good lubrication. Copper is conductive. Use in areas that two contacts will not touch and possibly short. Example: disconnect switches or large connectors and relays.ALUMINUM particles (L260Ap and M260Ap) = Use when aluminum metals are involved. Use in areas that two contacts will not touch and possibly short. Example: aluminum rails, bolts, connectors.GRAPHITE particles (L260Gp and M260Gp) = Graphite provides excellent lubricating and heat transfer characteristics. Use where lubrication is vital and heat absorption and dissipation is important.QUARTZ  (L260Qp and M260Qp) = Use when you need particles (non conductive) to assist in oxide breakup and you require good lubrication and heat abrasion.Quartz particles assist in breaking up oxidation and corrosion. Quartz is nonconductive.GRAPHITE/QUARTZ (L260GQp and M260GQp) = Use when heat transfer, lubrication and assistance is needed in breaking up oxides and corrosion. Finer particles than the copper. TEFLON (L260Tp and M260Tp) = Use when lubrication is essential. Teflon particles are nonconductive.CUSTOM PARTICLE FORMULATIONS:     Contact a CAIG Associate.
Electrical Applications: Antenna connections, battery terminals, buss bars, commutators, conductor rails, conductors, contactors, disconnects, drying and processing equipment, high amperage/high voltage applications, industrial electrical equipment (lifts, cranes, robotics, etc.), power tools, relays and switches (all heavy duty, knife, step, rotary, etc.), etc.Mechanical Applications: Bearings (all types), doors (closures), drives (chain/sprockets), hatch closures, linear motion systems, plugs (threaded holes), rack & pinion assemblies, screw devices (jacks, etc.), slide bushings, sliding parts, tracks/guides/rails, threaded closures, worm gears, etc.
Greases: with Particles   |   Lubricants: Conductive Plastics   |   Lubricants: Grease   |   Greases: No Particles   |   Enhancers: Conductive Plastics